Tor Proxy on Local Area Network (LAN)

What ?
Setup multiple computers on a LAN to route through a tor proxy for specific applications (Links2, , etc)

Why ?
-To allow novice Linux users (mom,dad,etc), to use Tor on applications that allow socks proxy settings like links2, without needing to know how to start Tor in the command line or setting a tor daemon.
- (My reason) To allow another computer to handle Tor with a base install and to close all ports except for 9050 (or a randomly chosen port) outbound on a select computer that you use for Tor browsing and other Tor applications (endcurl, endget, endtube, oldtube, torsocks) etc.

-If you have an implant or a beacon with key logging it will usually broadcast out on port 53 or port 80, close everything (using endwall.sh and comment all ports out except local host for the ports you need and the random outbound port you will use for Tor) and set Tor outbound to a random port (not 9050 say 34591) and set your Tor proxy server to accept inbound for this random port. This will basically squash outbound beacons.

How ?
You will need two computers to test this. On the Tor proxy server,find out the LAN router assigned internal ip address using
$ ip link

( for example say its 192.168.5.153) and add these lines to /usr/local/etc/tor/torrc